This is an HTML version of an attachment to the Freedom of Information request 'Hobart Airport - RWY 30 RNP-AR - Noise Monitors'.

Doc 17 
FoI 24-52
From:
s47F
To:
Cc:
Subject:
HBA - 3 STM deployment reports on FOCUS with updates
Date:
Wednesday, 23 December 2020 6:40:30 PM
Attachments:
image001.png
H s47F
All Hobarts deployment reports for the 3 portable units are on FOCUS for you to review.
Information:
-All NMTs’ L90 readings are rather low so all day and night thresholds are all set between 50dB to 57dB.
-We have also slight adjusted correction max altitude, see the table included here for details and comments.  We will further review data and discuss findings in the near year.
Name
LOCID
Purpose
Comment
Offten captured mixed aircraft and community noise (eg. Bird noise)
Connollys Marsh
Increased altitude to 9000ft.  Will need to further review this in New Year.
*weather sensor
46
Capture Noise from Dep RWY 12
Capture Noise from Arr RWY 30
Correlated noise are good aircraft noise (ie no mixed with community noise)
Primrose Sands
373
via the RNP
Not many aircrafts over this area.
Often captured mixed aircraft and community noise (eg. Bird noise, farm machinery?)
Capture RWY aligned Arr/Dep
Note that correlation range increased to 3KM to improve correlation for RNP Arr 12 Ops.
Richmond
375
plus Arr 12 via the RNP
RNP Arr 12 Ops about 1.7KM away from monitor, some not generating enough noise. Propose to review locations in
new year.
Name
LOCID
Threshold
Max-Altitude
Max-Range
Connollys Marsh
21:00-04:59 (50dB)
*weather sensor
46
05:00-20:59 (55dB)
2743m (9000 ft)
2500m
23:00-05:59 (50dB)
Primrose Sands
373
06:00-22:59 (57dB)
2500 (8200 ft)
2500m
21:00-04:59 (50dB)
Richmond
375
2500 (8200 ft)
3000m
05:00-20:59 (55dB)
Kind Regards
s47F
From: s47F
Sent: Thursday, 17 December 2020 1:51 PM
To: s47F
@envirosuite.com>; s47F
@envirosuite.com>;s47F
envirosuite.com>; s47F
@envirosuite.com>
Subject: RE: HBA - STM location and information (17 Dec 2020 amended)
His47F ,
We done initial threshold review and adjusted all 3 units.  Will review again next week and further adjust as required.
See blue comments for new thresholds from on onwards.
Site
Name
Address
ASA Offer Ref#
Connollys Marsh
45 (Note ASA has Sub as Connollys Marsh, but this address
asa46
*weather sensor
s47F
 Dunalley
is in Sub Dunalley)
s47F
 Primrose
asa52
Primrose Sands
Sands
26
asa51
Richmond
s47F
Richmond 9 s47F
 as listed by ASA.)
Cal-
Noise Data in
Site
Name
LOCID
Threshold
Firmware Deployed
Ref
Lat
Long
Altitude ANOMS
Connollys Marsh
23:00-05:59 (57dB)
Y (15
YES 
asa46 *weather sensor
46 06:00-22:59 (60dB)
4.7.5
Dec)
88.8
147735032 -42894986
33
(with Weather)
23:00-05:59 (57dB)
Y (15
asa52 Primrose Sands
373 06:00-22:59 (60dB)
4.7.5
Dec)
88.7
147651052 -42882452
174
YES
23:00-05:59 (57dB)
Y (16
asa51 Richmond
375 06:00-22:59 (62dB)
4.7.5
Dec)
89.1
147397152 -42762936
141
YES
Thanks
s47F
From: s47F
Sent: Thursday, 17 December 2020 12:02 PM
To: s47F
@envirosuite.com>; s47F
@envirosuite.com>;s47F
@envirosuite.com>; s47F
@envirosuite.com>
Subject: HBA - STM location and information (17 Dec 2020 amended)
His47F
by Airservices Australia pursuant to the Freedom of Information Act 1982 (Cth)
Sorted out Connollys Marsh, the street address given by ASA end up in suburb Dunalley.
Adjusted table in the original email – see blue comment.
Regards
s47F
From: s47F
Sent: Thursday, 17 December 2020 11:32 AM
Released To: s47F
@envirosuite.com>; s47F
@envirosuite.com>;s47F
@envirosuite.com>; s47F
@envirosuite.com>
Subject: RE: HBA - STM location and information (17 Dec 2020)
 - Thank you 
s47F
 for updating co-ordinates in FOCUS. I can see their location all look better in the map now.
s47F – Connollys Marsh – I can’t find the address in the ASA offer list?
Rob, as per your request.
Site
Name
Address
ASA Offer Ref#


Doc 17 
FoI 24-52
Connollys Marsh
45 (Note ASA has Sub as Connollys Marsh, but this address
asa46
*weather sensor
s47F
Dunalley
is in Sub Dunalley)
s47F
 Primrose
asa52
Primrose Sands
Sands
26
asa51
Richmond
s47F
Richmond 9 s47F
 as listed by ASA.)
 
 
Cal-
Noise Data in
Site
Name
LOCID Threshold Firmware Deployed
Ref
Lat
Long
Altitude ANOMS
Connollys Marsh
Y (15
YES 
asa46 *weather sensor
46
60dB
4.7.5
Dec)
88.8
147735032 -42894986
33
(with Weather)
Y (15
asa52 Primrose Sands
373
60dB
4.7.5
Dec)
88.7
147651052 -42882452
174
YES
Y (16
asa51 Richmond
375
60dB
4.7.5
Dec)
89.1
147397152 -42762936
141
YES
 
 
Regards
s47F
 
From: s47F
@envirosuite.com> 
Sent: Thursday, 17 December 2020 10:41 AM
To: s47F
@envirosuite.com>; s47F
@envirosuite.com>;s47F
@envirosuite.com>; s47F
@envirosuite.com>
Subject: RE: HBA - STM location images from Bo
 
Thanks s47F
Once you get the updated Primrose Lat/Long – can you send me an updated version of this summary.
 
Can you also include in the table the Address and offer number reference (as per s47F s spreadsheet and kmz) as part of this table. AS I want to send per off a summary at some point today.
 
Thanks
s47F
 
From: s47F
@envirosuite.com> 
Sent: Thursday, 17 December 2020 10:31 AM
To: s47F
@envirosuite.com>; s47F
@envirosuite.com>;s47F
envirosuite.com>; s47F
@envirosuite.com>
Subject: HBA - STM location images from Bo
 
Hi
– Have you reconfirmed Primrose Sands co-ordinates?
s47F
  The supplied co-ordinates show street address of “s47F
” instead of the intended address of “s47F

 
 
Site
Name
LOCID
Threshold Firmware Deployed Cal-Ref
Lat
Long
Altitude
Noise Data in ANOMS
Connollys Marsh
YES including Weather
asa46
(*weather sensor)
374
60dB
4.7.5
Y (15 Dec)  
147735000 -42895000 33
Data
asa52
Primrose Sands
46
60dB
4.7.5
Y (15 Dec) 88.7
147651000 -42882000 174
YES
asa51
Richmond
375 
60dB
4.7.5
Y (16 Dec) 89.1
147397200 -42762900 141
YES
 
 
His47F
 
Here is some images 
send to me 
s47F
 at 9:50am.  Are they what you wanted? Pictures hasn’t got location name there.
 
 
by Airservices Australia pursuant to the Freedom of Information Act 1982 (Cth)
 
Regards
s47F
 
Released